Menu

Home
Store
Cart
Checkout
Gallery
Gadgets
- Arduino “Stab Timer”
About
Account
Blog
Contact

My account

Login

Username or email address *

Password *

Remember me

Lost your password?

Tweaking stuff before making some prototypes later

Tweaking stuff before making some prototypes later this month. The HN-7 feels pretty good, I modified the Witch Finger to seat back in the hand further and let the tip of the index finger curl on to the flat of the scale. Both these reduced twisting/rolling from off axis impacts significantly to where I am happy with it now. #testyourstuff⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #picture #knife #artwork #knifeporn #artgallery #shiv #g9 #lumix #knifenut

Even using a mold to press with, I adjust every hn

Even using a mold to press with, I adjust every hn-9 sheath until it's where it needs to be. These will be going out tomorrow. 10 more to go in this batch.⁣
⁣
#knifenut #knifenuts #knifelife #usnstagram #knivesofig #bladeporn #knifepics #knifemaking #havocworks #usualsuspectnetwork #makersgonnamake #knifemaker #custom #knifeporn #custommade #knives #customknives #usnfollow #knife #blade #knifefanatic #blades #edcgear #madeinusa #madeinohio

The yearly spider invasion of my garage/shop is un

The yearly spider invasion of my garage/shop is underway. #macrophotography #spiders #photo

Ghetto handle sandblasting fixture = carpet tape a

Ghetto handle sandblasting fixture = carpet tape and hdpe scrap.⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #picture #knife #artwork #knifeporn #artgallery #shiv

Getting HN-9's ready to ship today. 20 more go to.

Getting HN-9's ready to ship today. 20 more go to.⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #knife #knifeporn #knifenut #knifelife

Here we go again. HN-9 batch # I don't even rememb

Here we go again. HN-9 batch # I don't even remember anymore! #knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #videos #knife #knifeporn #knifenut #knifelife #em5mkii #aircross2

Sunday funday (or at least my version of it). I bu

Sunday funday (or at least my version of it). I built and programmed an Arduino based "stab timer" and an Android bluetooth app to control it. It triggers a random buzzer and uses a piezo sensor to sense when my cardboard target has been stabbed, then sends the elapsed time back to the Android app and displays it. I haven't practiced much lately but feel pretty good about 0.41 seconds with my HN-9. #havocworks #knifeporn #knifenut #usnstagram #edcknife #edc #arduinoproject #training4life #knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #knife #knifeporn #knifenut #knifelife #code

Had a Kaos-bit get sent in with a chipped edge nea

Had a Kaos-bit get sent in with a chipped edge near the tip a while ago. I sharpen these on a 1x42 with the belt split to 1/4" wide. Took me a while to get to it since I needed a new Kalamazoo 1x42 grinder but all fixed now!⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #picture #knife #knifeporn #em5markii #luminar

Translation excerpts of a youtube review by @bruta

Translation excerpts of a youtube review by @brutalica over me playing with some new @gudsenmoza video gear #knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #videos #knife #knifeporn #knifenut #knifelife

Sharpening some HN9's while listening to @eluveiti

Sharpening some HN9's while listening to @eluveitie_official today. This setup on my @beaumontmetalworks TX is a rig job but gets the job done. #knives #blade #tacticalknives #knifelife #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #video #knife #artwork #knifeporn #artgallery
#shiv #em5mkii #havocworks

Clean and ship. The first 10 of this batch are don

Clean and ship. The first 10 of this batch are done. I'll be invoicing over the next week as I finish this batch of 40 so if you ordered, keep an eye out!⁣
⁣
#knIves #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #picture #knife #artwork #knifeporn #artgallery ⁣
#shiv #luminar #em5

Running a little behind due to stuff breaking. Som

Running a little behind due to stuff breaking. Some HN-9 handles being born today.⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #knife #knifeporn #knifenut #knifelife

A bunch of HN-9's fresh out of the heat treat oven

A bunch of HN-9's fresh out of the heat treat oven. On track to ship these the first week of next month.⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edc #everydaycarry #tacticalart #picture #knife #artwork #knifeporn #artgallery ⁣
#shiv #rx100 #havocworks

The HN-9 was released for pre-order 1 year ago tod

The HN-9 was released for pre-order 1 year ago today. There are 100's out there now. I am very appreciative of all the support!⁣
⁣
⁣
⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #videos #knife #knifeporn #knifenut #knifelife

Ran a single bar to verify all was well with the c

Ran a single bar to verify all was well with the control retrofit. Pretty happy overall, surface finish is definitely improved and my spindle is +-2 rpm instead of +-50. This is profiling with a @garrtool 1/4" H45 high feed end mill. 6k RPM, 150IPM and .015 DOC. #knifemaker #blade #video #instamachinist #cnc #havocworks #edc

Kydexing in the morning! My CNC is back up, steel

Kydexing in the morning! My CNC is back up, steel is here, HN9s are coming.⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #knife #knifeporn #knifenut #knifelife

Girlfriend made a keto flag cake. Happy 4th!

Girlfriend made a keto flag cake. Happy 4th!

I forgot how cute this thing was! ⁣ ⁣ #knives

I forgot how cute this thing was! ⁣
⁣
#knives #blade #tacticalknives #weapons #tools #bladeshow #knifemaker #edcknife #everydaycarry #tacticalart #videos #knife #knifeporn #knifenut #knifelife

Re-pack a ball nut in the machine day. The adhesiv

Re-pack a ball nut in the machine day. The adhesive they used when I had the screw rebuilt failed and the return plugs dropped out of 3 circuits. 2 more were loose. The wire is bent 90 degrees at the ends so I don't end up with balls in places they don't go.
#notfuntimes

Out with the old and in with the new. Starting a r

Out with the old and in with the new. Starting a retrofit of my CNC control during covid-time. No more 25 year old consumer PC hardware waiting to detonate.

Copyright 2020

0